|
| |
Process limit alarms monitor sensor or
process current input signals and trip a relay output if the input exceeds a
user-defined hi/lo setpoint limit. Select from AC-, DC, and loop-powered models.
Configuration is easy with Windows software, push-buttons, switches, or pots for
settings depending on the series.
Model Number
|
Description
|
|
801A |
801A:
Intelligent Alarm,
Universal TC/RTD/mV Input • Thermocouple (J, K, T, R, S, E, B,
N), RTD (Pt, Ni, Cu), millivolt (±100mV DC) input |
|
811A / 812A |
Intelligent Alarm,
DC Voltage/Current Input • ±100V or 0 to 22mA DC input ranges or 2
input channels, ±100V or 0 to 22mA DC input ranges |
|
260A |
Limit Alarm,
DC Current Input, Loop-Powered • 4 to 20mA DC input • Single mechanical
relay ouput • 4.5V DC from input loop power |
|
|
Limit
Alarm, DC Voltage/Current
Input, AC or DC-Powered • 0 to 20mA DC, 0 to 100V DC, AC current (with
optional sensor) input • Single or dual mechanical relays |
|
811T |
• ±100V or 0 to 22mA DC input ranges
(AC current with optional sensor)• 0 to 20mA DC, 0 to 10V DC output•
Mechanical relay alarm
(25V @ 5A) |
|
913MB / 914MB |
• 4 input channels• 0 to 20mA DC (0
to 20A AC with AC sensor)
or ±10V DC input range• 4
alarm channels, open drain
MOSFETS (1A DC loads, 0 to 35V DC) |
|
822A |
• 2 input channels, thermocouple
(types J, K, T, R, S, E, B, N), or millivolt (±100mV DC) input•
Dual mechanical relays output |
|
801T |
• Thermocouple (J, K, T, R, S, E, B,
N), RTD (Pt, Ni, Cu), millivolt (±100mV DC), 0 to 500 ohms input• 0 to
20mA DC, 0 to 10V DC output•
Mechanical relay (25V @ 5A) alarm |
|
924MB |
• 4 input channels, thermocouple
(types J, K, T, R, S, E, B, N) or millivolt (±100mV DC) input•
4 alarm channels,
open drain MOSFETS (1A DC loads, 0 to 35V DC) |
|
832A |
• 2 input channels, RTD (Pt, Ni, Cu)
input• Dual mechanical relay
outputs |
|
932MB / 934MB |
• 2 or 4 input channels, RTD (100 ohm
Pt, 120 ohm Ni, 10 ohm Cu) or resistance (0 to 500 ohms) input•
Solid-state relays discrete output,
Form A, SPST-NO |
|
841T |
• 0 to 50KHz, 0 to 65535 pulses
input• 0 to 20mA DC, 0 to 10V DC output•
Mechanical alarm relay (25V @ 5A) |
|
942MB |
• 2 input channels, 0 to 50KHz in 3
selectable ranges: Amplitudes up to 140V AC or 200V peak, pulse counter
range of 0 to 65535•
Solid-state discrete output
relays (1A DC loads), 0 to 48V DC |
|
851T |
• Strain gauges (full, half, quarter
bridge), load cells (4 or 6-wire), millivolts input• 0 to 20mA DC, 0 to
10V DC output• Mechanical
alarm relay (25V @ 5A) |
| 900C-SIP |
Configuration Software
for Windows® (XP/Vista/7) on CD-ROM |
|
|
These
ActiveX / .NET
software controls provide a fast, easy way to communicate with any
Modbus slave devices connected to your PC. Get your Visual Basic, Visual
C, .NET, Excel |
|
151C-SIP / 155H-SIP |
Acromag’s
configuration software
is the key to the 151T and 155H transmitters’ easy-to-use operation. The
software employs the friendly Windows® interface |
| 800C-SIP |
Acromag's
configuration software
is the key to the IntelliPack's easy-to-use operation. The software
employs the friendly Windows® XP, Vista, 7, and 8 interface |
|
ST13C-SIP |
Software
Interface Package. Includes
configuration software (ST130-CONFIG), isolator (USB-Isolator) and two
USB cables (Part # 4001-112, 4001-113) for Acromag ST130 Series |
| Agility™
Config Tool |
The
Agility™ Config Tool
is a mobile application that allows
easy setup and configuration of Acromag TT Series transmitters via a
tethered mobile device. |
|
TTC-SIP |
Software
Interface Package for Acromag
TT Series transmitters. Includes configuration sofware CD-ROM
(5040-944), isolator (USB-ISOLATOR) and two USB cable (4001-112,
4001-113) |
|
